Blog
Knowing What Makes Windows Energy Efficient Can Save You Money

Knowing What Makes Windows Energy Efficient Can Save You Money

When it comes to increasing energy efficiency in your home, it’s easy to forget the impact your windows have on your energy usage. Drafty windows are easy to diagnose, but you don’t need to have a noticeable concern with your windows to benefit from replacement windows. The correct windows can help you save energy when it comes to heating and cooling your home.

Thanks to modern technologies, the glass in your windows can boost energy efficiency. And that doesn’t just mean tinting your windows. Multiple-pane alternatives, various kinds of glazing, gas fills, and even the method used to install the glass can help you save money on your energy bills throughout the year, regardless of the weather.

Get to Know the ENERGY STAR® Basics
When selecting windows for energy efficiency, it's important to first research their energy-performance ratings in relation to the Woburn climate and your home's design. What does “energy efficiency” even mean and how can you contrast the energy savings of one window against another once they’re in your home?

ENERGY STAR is a government-backed trademark that provides consumers with a trustworthy source for energy efficiency information about products. When shopping for an energy-efficient window, search for the ENERGY STAR label. It will highlight a number of the factors that go into identifying performance. Here’s a breakdown of what these categories mean:

  • U-Factor: The rate of heat loss to the outside. A low U-factor is better.
  • Solar Heat Gain Coefficient (SHGC): Normally indicated as a fraction, this is the amount of solar radiation that a window lets in. SHGC is measured on a scale from 0 to 1. Window SHGC normally ranges from 0.25 to 0.80. Again, a low number is better.
  • Air Leakage (AL): The rate at which air passes through the joints in the window. The lower the AL value, the less air leakage.
  • Visible Transmittance (VT): The amount of light the window lets through measured on a scale of 0 to 1, with values generally ranging from 0.20 to 0.80. The higher the VT, the more light you see.
  • Condensation Resistance Factor (CRF): How strongly the window resists water buildup on a scale from 0 to 100. The higher the CRF, the better the window will resist condensation.

Make sure to find scores based on whole-unit numbers as opposed to center-of-glass numbers (COG). Whole-unit numbers are more dependable indicators of the window’s overall performance, while COG numbers may not be as consistently reliable in areas of the window farther away from the center.

More Panes, Less Pain
Energy efficiency is increased in windows with more panes of glass in them. Double-pane windows are a attractive choice for homeowners looking for more energy efficiency with replacement windows.

While they can cost more, triple-pane windows can offer even higher energy efficiency that is worth the money. Adding a middle pane means increased protection against the elements and allows the inner pane of the window to stay nearer to room temperature. A third pane also reduces any convection currents and drafts that could make a room chillier.

Beyond improving energy efficiency, triple-pane windows also offer greater protection against loud noises and break-in damage than double-pane replacement windows. So, if you have rambunctious neighbors or live on a heavy-traffic street, you might benefit from triple-pane windows.

More Than Just Tinting
The glazing on your window can create an impact in reducing both the SHGC and VT that influence ENERGY STAR ratings. For years, people have applied tinted glazing to block sunlight and reduce glare. Two other techniques can help on both sides of the glass and increase energy efficiency in your home.

On windows with two or more panes of glass, insulated glazing is created when the glass panes are spaced apart and hermetically sealed, leaving an insulating air space. Insulated window glazing primarily lowers the U-factor, but it also improves the SHGC.

Low-e coating can also have an effect on energy efficiency. A microscopically thin, virtually invisible metal or metallic oxide layer added directly on the surface of one or more of the panes of glass, low-e coating helps decrease the window’s U-factor and can reduce energy loss by as much as 30 to 50 percent.

Insulating with Gas
Increasingly common today, gas-filled windows are made of at least two panes of glass with either argon or krypton gas filling the space between them. This gas adds another invisible barrier against the heat and cold that would effect a window’s U-factor or leakage rate.

Argon and krypton are nontoxic, naturally occurring gasses found in the air we breathe. Factory sealing the gas between the window’s glazing layers reduces the possibility of leakage or condensation buildup on the interior and exterior of your windows.

Edge Spacers Seal Out Leaks
The last factor that helps improve the window’s energy efficiency is the edge spacer. Edge spacers serve a number of functions. They:

  • resist the stress the window faces with expansion and contraction during times of heat and cold.
  • create a moisture barrier to prevent water or vapor condensation.
  • provide a gas-tight seal that prevents the loss of any gas in low-e windows.

Windows are available in single-seal or double-seal systems. Aluminum seals are most common due to the material’s strong energy-conducting traits.

Single-seal systems include an organic sealant applied behind the spacers that holds the unit together and prevents moisture leakage. A double-seal system features a secondary backing sealant, often silicon, to further defend against leaks. Double-seal systems are most often seen in low-e windows to stop any of the sealed gasses from escaping.

There’s a lot of science that goes into developing an energy-efficient replacement window. But, by understanding the basics of what goes into the ENERGY STAR rating and understanding the differences in window glass options, you can buy windows that will make your home cozy and save you money at the same time.

Find out more about energy efficiency in your windows by visiting our team at Pella of Woburn. Call 781-935-4947 or stop by our showroom. You can also schedule an appointment online for a free, in-home consultation.

Back to Blog
Live Chat
I can help with your window or door replacement questions.